Characteristics
- surge protector type 2
- In = 20kA; Imax = 40kA
- internal disconnection, status indicator
- pluggable module
- remote signaling
| Article No. | 296.061.512 |
|---|---|
| E-Number | 808 418 000 |
| Technical specification | |
| SPD type | T2 |
| Number of poles | 3+1 |
| max. discharge current (Imax) | 40 kA |
| Discharge current max. [Imax] | 100 kA |
| Response time [ta] | 0 ns |
| Voltage protection level [Up] | 1.25 kV |
| Nominal cross section conductor (min/max) | 1.5 - 10.0 mm² |
| Nominal discharge surge current (8/20) | 80 kA |
| Signaling contact | Yes |
| Nominal frequency [fn] | 50.0 - 60.0 Hz |
| Nominal line voltage Un AC | 230 V |
| Continuous voltage AC max. | 275 V |
| Discharge current max. (8/20) µs [Imax] | 40 kA |
| Protection level max. (at 5kA) | 0.9 kV |
| Follow current [IF] | 0 kA |
| follow current extinguishing capability [Ifi] | Unendlich kA eff |
| TOV-voltage L-N [UT] | 335 V / 5 sec. |
| TOV-voltage N-PE [UT] | 1200 V / 300A / 200ms fest |
| Short circuit resistance (Icw) | 10 kA |
| Fault indication | Meschanisch, Rot |
| Temperature range | -40.0 - 85.0 °C |
| Degree of protection | IP20 |
| Fuse max. (gG) | 125 A |
| Mounting on | Hutschiene 35 mm |
| Material housing | |
| Signaling on the device | Optic |
| Connection cross section solid / stranded max. | 1.5 mm² |
| Switching capacity signaling contact | 250 V / 0,5 A (AC) - 30 V / 2 A (DC) |
| System configuration | |
| Construction size | 2 modular spacing |
| Integrated backup fuse | No |
| 20/Pol | |
| Type of poles | 4 |
| With remote signalling contact | Yes |
| Mounting method | DIN rail (top hat rail) 35 mm |
| Category type 2 | Yes |
| Degree of protection (IP) | IP20 |
| Standards | |
| Test standards Germany | |
| Test standards International | UL 1449 ed.3 |
| Test standards USA | IEC 61643-11 |
| Test standards Europe | EN 61643-11 |
| Homologation | VDE, ÖVE, UL |
| Commercial specification | |
| Customs number | 85363000 |
| country of origin | NUL |
