Characteristics
- surge protector type 1+2
- limp = 12.5kA/pole (10/350µs
- optimized to TOV
- pluggable module
- remote signaling
| Article No. | 296.045.575 |
|---|---|
| E-Number | 808 488 010 |
| Technical specification | |
| SPD type | T1 / T2 |
| Number of poles | 3+1 |
| Impulse current [Iimp]_(10/350) | 12.5 kA |
| max. discharge current (Imax) | 50 kA |
| Response time [ta] | 0 ns |
| Voltage protection level [Up] | 1.3 kV |
| Nominal cross section conductor (min/max) | 0.0 - 42.0 mm² |
| Signaling contact | Yes |
| Nominal discharge surge current (8/20) | 20 kA |
| Nominal frequency [fn] | 50.0 - 60.0 Hz |
| Nominal line voltage Un AC | 230 V |
| Continuous voltage AC max. | 280 V |
| Discharge current max. (8/20) µs [Imax] | 50 kA |
| Follow current [IF] | 0 kA |
| follow current extinguishing capability [Ifi] | unendlich kA eff |
| TOV-voltage L-N [UT] | 440 Vac |
| Short circuit resistance (Icw) | 25 kA |
| Fault indication | Mechanisch, Rot |
| Temperature range | -40.0 - 85.0 °C |
| Degree of protection | IP 20 |
| Fuse max. (gG) | 160 A |
| Mounting on | Hutschiene 35 mm |
| Material housing | |
| Signaling on the device | Optic |
| Connection cross section solid / stranded max. | 1.5 mm² |
| Switching capacity signaling contact | 250 V / 0,5 A (AC) - 30 V / 2 A (DC) |
| System configuration | |
| Energetically coordinated protective effect to the terminal | Yes |
| Material housing | |
| Mounting method | DIN rail (top hat rail) 35 mm |
| Remote signalling | Yes |
| Degree of protection (IP) | IP20 |
| Construction size | 4 modular spacing |
| Voltage protection level L-N [Up] | 1.3 kV |
| Total discharge current (8/20) (L N-PE) | 50 kA |
| Standards | |
| Test standards Germany | |
| Test standards International | IEC 61643-11 |
| Test standards USA | UL 1449 ed.3 |
| Test standards Europe | EN 61643-11 |
| Homologation | VDE, ÖVE und UL |
| Commercial specification | |
| Customs number | 85363000 |
| country of origin | NUL |
| Logistic specification | |
| VPE Weight | 0.515 kg |
